TB/T 2073-2010 电气化铁路接触网零部件技术条件

作者:标准资料网 时间:2024-05-13 13:07:34   浏览:9433   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:电气化铁路接触网零部件技术条件
英文名称:General technical specification of fittings for overhead contact in electrification railway
中标分类: 铁路 >> 牵引供电 >> 接触网零件
ICS分类: 电气工程 >> 电力牵引设备
替代情况:替代TB/T 2073-2003
发布部门:中华人民共和国铁道部
发布日期:2010-06-09
实施日期:2010-12-01
首发日期:
作废日期:
主管部门:中铁电气化局集团有限公司
提出单位:中铁电气化局集团有限公司
归口单位:中铁电气化局集团有限公司
起草单位:中铁电气化局集团有限公司、中铁电气化勘测设计研究院
起草人:高鸣、邢尊军、王作祥、张焕武
出版社:中国铁道出版社
出版日期:2010-12-01
适用范围

标准规定了电气化铁路接触网零部件的术语、定义、分类、技术要求、检验规则、标志及包装。
本标准适用于电气化铁路接触网系统各类零部件。
对城市轨道交通架空接触网采用的同类零部件可参照本标准,对在特殊腐蚀介质区段(如城郊SO2,等烟气严重地段)和高寒、高拔环境条件下使用的接触网零部件还应满足其他的有关规定。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 铁路 牵引供电 接触网零件 电气工程 电力牵引设备
下载地址: 点击此处下载
【英文标准名称】:StandardfortheDesignandInstallationofOxygen-FuelGasSystemsforWelding,Cutting,andAlliedProcesses
【原文标准名称】:焊接、切削和同系列加工的氧燃料气体系统的设计和安装标准
【标准号】:ANSI/NFPA51-2012
【标准状态】:现行
【国别】:美国
【发布日期】:2012
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:切削;氧;氧气切割;热切割设备;焊接;焊接工程
【英文主题词】:Cutting;Oxygen;Oxygencutting;Thermalcuttingequipment;Welding;Weldingengineering
【摘要】:1.1Scope.1.1.1Thisstandardappliestothefollowing:(1)Designandinstallationofoxygen?fuelgasweldingandcuttingsystemsandalliedprocesses(see3.3.2),exceptforsystemsmeetingthecriteriain1.1.5(2)Utilizationofgaseousfuelsgeneratedfromflammableliquidsunderpressurewheresuchfuelsareusedwithoxygen(3)Storageonthesiteofaweldingandcuttingsysteminstallationofthefollowing:(a)Gasestobeusedwithsuchsystemswheremorethanonecylindereachofoxygenandfuelgasarestoredinanysinglestoragearea[includesstorageofmorethanonecylindereachinanysinglestorageareaeventhoughallsuchstoredcylindersmaybeintendedforuseinsystemsofthekinddescribedin1.1.5(1)](b)Calciumcarbide1.1.2Unlessspecificallyindicatedotherwise,thetermweldingandcuttingsystemsshallbeconsideredtoincludealliedprocessesinthisstandard.1.1.3Whereonlyaportionofafuelgassystemistobeusedforwelding,cutting,oralliedprocesses,onlythatportionofthesystemneedcomplywiththisstandard.1.1.4Whereonlyaportionofanoxygensystemistobeusedwithfuelgasforwelding,cutting,oralliedprocesses,onlythatportionofthesystemneedcomplywiththisstandard.1.1.5Thisstandardshallnotapplytothefollowing:(1)*Systemsconsistingofasinglecylindernotexceeding3.4m3(120ft3)ofoxygenandasinglecylindernotexceeding3.4m3(120ft3)offuelgasusedforweldingandcutting(2)Systemsinwhichfuelgasesarenottobeusedwithoxygen,asdescribedinNFPA54,NationalFuelGasCode,andNFPA58,LiquefiedPetroleumGasCode(3)Themanufactureofgasesandthefillingofcylinders(4)Storageofemptycylinders(5)Compressedair?fuelgassystems
【中国标准分类号】:J64
【国际标准分类号】:25_160_30
【页数】:
【正文语种】:英语


【英文标准名称】:Presentationofreliability,maintainabilityandavailabilitypredictions
【原文标准名称】:可靠性,维修性和可用性预测的表示
【标准号】:NFX60-520-1988
【标准状态】:现行
【国别】:法国
【发布日期】:1988-05-01
【实施或试行日期】:
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:A10
【国际标准分类号】:
【页数】:14P.;A4
【正文语种】:法语